SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime

SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime

SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime

Samsung Clone J7 Prime Nand Flash File,
Samsung Clone J7 Prime Nand Firmware,
Samsung Clone J7 Prime Nand Stock Rom,
Samsung Clone J7 Prime Nand Flash File, Firmware, Stock Rom, LCD Fix, Hang Logo, Camera Fix, Monkey Virus Clean Done

Phone found! [ 21 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x1C , NAND : b128k
[FW_READER] : Step #3 Passed!
Model Name  : project_public
Model Brand : welcome
Model Device: scx15_sp7715ga
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : RJ093_P113_J7_Prime_ZHX-V1.0_20180312
Model Ext   : J7 Prime

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b128k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.34.2_Release.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system_b128k.img
[Read Ok] : cache_b128k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b128k.img

AndroidInfo created
Firmware Size : 307 MiB
Saved to : C:\Users\User-1\Desktop\SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime\
Done!

Elapsed: 00:07:42

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime
Step  #1 : Identify

MEMORY : NAND
LAYOUT : 128 KiB

Step  #2 : Select logic
Select Logic : SC7715

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv_b128k_p2k.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : CP2._CP2_WCN_14C_W15.34.2_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system_b128k_p2k.img
[ADD FILE] : cache_b128k_p2k.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata_b128k_p2k.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0015
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:00:09

Saved to : SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime.pac
Done!

----------------------------------------------------

For Password: Contact Me
Contact Me: 01748947478 Whatsapp, IMO, 11AM to 10PM

Paid File 100% working

DOWNLOAD

INSTRUCTION:

Step 1: Download the firmware to your computer.

Step 2: Extract the file in desire drive to your computer.

Step 3: Install SPD Android USB Driver (skip if already installed).

Step 4: Open SPD Flash Tool and select the .pac Firmware file using Load Packet interface.

Step 5: Now click on Start Downloading button in Flash Tool.

Step 6: Connect the device to Computer using USB by pressing Volume Up or Down button.

Step 7: Now wait until during the flashing process after done you will see passed message.

Step 8: If the flash success a green will show on the top of the display.